LED strip lighting for kitchens, under-cabinet runs, shelving, media walls, coves and feature lighting.
The COB dotless strip gives a smooth, continuous line of light with no visible dots, even on glossy worktops. It comes in warm white and cool white, and is pre-wired with a 2m cable in 1m to 5m lengths, so there is no soldering on site. It runs on 24V, so you will need a suitable 24V LED driver, plus a dimmer or controller if you want one.
Pair it with the ALL LED 2m aluminium profiles to finish the job. The shallow profile suits tight spaces, and the deep profile gives a softer spread. Both come with an opal diffuser for an even, glare-free line.
Live stock on all lengths. Need help choosing a driver or sizing a run? Call the branch on 01656 765 300.
Add up the watts. The ALL LED COB strip is 10W per metre, so three 1m strips or one 3m strip is 30W. Choose a 24V driver with about 20% spare, so a 50W or 60W driver for 30W. The ALL LED Drive24 range comes in 15, 30, 50, 60, 80 and 100W.
Yes, with a dimmable driver. Use the ALL LED Drive24TD 50W triac dimmable driver with a mains LED dimmer such as the ALL LED ADIM150. The standard Drive24 drivers are not dimmable.
COB means chip on board. The LEDs are packed so closely that the strip gives one smooth line of light with no visible dots, even when it reflects on a glossy worktop.
Warm white (3000K) gives a cosy light for living rooms, bedrooms, coves and media walls. Cool white (4000K) is crisper, for kitchen worktops, utility rooms and display shelving.
It is recommended. An aluminium profile draws heat away from the strip and gives a neat finish, and the opal diffuser softens the light. The ALL LED 2m profiles come in shallow and deep versions.
Site version: 5.8.7.0 