ALL LED Drive24 constant voltage LED drivers, to power 24V LED strip and other 24V DC lighting from the mains.
The Drive24 range comes in 15, 30, 60, 80 and 100W, plus the Drive24TD, a 50W triac dimmable driver for dimmable installs. All are 24V DC constant voltage, to match the ALL LED COB dotless strip we stock in our LED strip range.
Live stock on all sizes. Not sure which driver your run needs? Call the branch on 01656 765 300 with the strip length.
A constant voltage driver gives a fixed output, here 24V DC, and suits LED strip and other 24V lighting. A constant current driver gives a fixed current and suits certain LED panels and modules. Always match the driver type and voltage to the LEDs, or they can fail.
Add up the watts of everything on the driver, then allow about 20% spare. The ALL LED COB strip is 10W per metre, so 3m is 30W and needs at least a 36W driver, so choose the 50W or 60W.
Yes, as long as the total wattage stays within the driver's rating with some spare. Wire each strip back to the driver output in parallel, rather than chaining long runs end to end.
The Drive24TD 50W is triac dimmable. Use it with a compatible mains LED dimmer, such as the ALL LED ADIM150. The standard Drive24 drivers are not dimmable.
No. The voltage must match. These Drive24 drivers are 24V only, so use them with 24V strip such as the ALL LED COB dotless range.
Site version: 5.8.7.0 