Commercial lighting from Kosnic and ALL LED for offices, retail units, warehouses and communal areas. The range runs from LED panels and battens to high bays and commercial downlights, built for longer running hours and lower maintenance than domestic kit, with the ceiling accessories to mount them.
These are the fittings that go into contract and refurbishment work, where light output, glare control and lifespan carry more weight than price on its own. Specify by lumen output, colour temperature and mounting type, and order at trade rates.
Specifying a full project? See our emergency lighting for compliance, domestic LED downlights for residential jobs, and exterior lighting for outdoor areas.
It comes down to mounting height. High bays are built for tall spaces, roughly 6 metres and above, such as warehouses, factories and sports halls, and use tighter optics to throw light down to the floor. Low bays suit lower ceilings under about 6 metres, like workshops and retail units, with a wider spread at shorter range.What is the difference between a high bay and a low bay light?
It depends on the task. As a rough guide, a general office wants around 300 to 500 lux, warehouse and storage areas around 150 to 200 lux, and detailed or workshop tasks more. Work from the target lux for the space times the floor area to get the total lumens, or send us the room sizes and we will help spec it.How many lumens do I need for a commercial space?
An LED panel is a slim recessed fitting, usually 600 x 600mm or 1200 x 600mm, that drops straight into a suspended grid ceiling. It gives flat, even, low-glare light and is the standard choice for offices, receptions, schools, surgeries and retail.What is an LED panel and where is it used?
On escape routes, above final exits and in stairwells, yes. Those areas need battery-backup emergency fittings or a dedicated emergency system to stay lit in a power cut, which is a compliance requirement. See our emergency lighting range for the maintained and non-maintained options.Do I need emergency versions of commercial fittings?
IP20 is fine for clean, dry offices and shops. Step up to IP65 for dusty warehouses, cold stores, car parks, canopies and any washdown or damp area, where the fitting needs to be sealed against dust and water jets.What IP rating do I need for a warehouse or damp area?