BDC14FSPDHBM Hager 14Way H/igh Int Flush C/W 2 x 100A RCCB+SURGE

Features

Consumer Unit Design 50 Flush 100A Configurable with SPD

For the distribution of power in a residential application, conforming to BS EN 61439-3 including Annex ZB (16kA rating).

Design 50 has been created to fulfil the requirements in the market for an aesthetically pleasing consumer unit which meets the requirements of the wiring regulations (BS 7671) and allows the consumer unit to be installed flush at the height stated in the building regulations (Part M), with minimum impact on the area. Regulation 421.1.201 within domestic (household) applications consumer units and similar assemblies shall comply with BS EN 61439-3 and shall have their enclosure manufactured from a non-combustible material. Regulation 411.3.3 additional protection by means of a 30mA RCD Regulation 314.1&2 segregation of circuits to avoid danger and minimise any inconvenience in the event of a fault. Regulation 531.3.2 Unwanted tripping (ii) in order to avoid unwanted tripping by protective conductor currents and/or earth leakage currents, the accumulation of such currents downstream of the RCD shall not be more than 30% of the rated residual operating current. High integrity boards allow circuits with high earth leakage currents to be individually protected by RCBOs, whilst the rest of the circuits are separated across the two RCCBs. Regulation 522.6.202 protection of wiring concealed in walls or partitions with RCD 30mA. Regulation 531.3.3 Selection of appropriate RCD. Type A RCCBs can detect and respond to both AC and pulsating DC components. Regulation 536.4.3.2 & 536.4.202 overload protection of switches and RCCBs. For installations where the upstream overload protection is less than or equal to 100A. Regulation 443.4 Protection against transient over voltages, provided by factory fitted type 2 SPD. The curved lines remove the harsh appearance of a surface mounted enclosure on the wall. The ability to provide bespoke colour and pattern finishes allows the board to become part of the interior design by either blending in or making a statement.